Diameter: 254mm(10") Number of teeth: 60T Arbor: 30mm Reduction ring: 16mm & 25.4mm Specially used for cutting wood with nails

Round steel file Length:200mm(8") Material:T12 steel Unique design handle Ideal for steel Packed by plastic hanger

1/2"Dr. deep 6pt. socket Size: 27mm Length: 78mm Material: 50BV30 steel Heat treatment Chromed plated Packed by plastic hanger

Max. weight:40kg With 2g graduation Display : LED screen Double-sided display Charging voltage:220-240V 50/60Hz 10 seconds enter into Energy-saving model

Tile cutter blade Material:tungsten carbide Blade size:Ø22xØ6x2mm Suitable for WTR1508 WTR1510 WTR1512 WTR2512 Packed by blister card

9pcs ball point hex key set Material：Cr-V Size：1.5mm,2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm. Extra-long arm Heat treatment and

254mm(10") 40T,arbor:30mm With 16mm & 25.4mm reduction ring Wood cutting Packed by double blister

5pcs/set Size：3X61，4X75，5X86,6X93，8X117 Packed by blister card

Tip type: phillips Tip size: PH2 Round shank Diameter: 6.0mm Length: 38mm Material: Cr-V steel Blade finish: black tip Magnetised

Copper and aluminum pipe cutter Cutting diameter: 3-32mm With high quality blade and aluminum knob Packed by sliding card

Voltage:20V Temperature:300/550°C Airflow:100/200 L/min Include: 1 Pcs reduction nozzle 1 Pcs reflector nozzle 1 Pcs 3.0Ah Battery pack (WLBP530) 1

Gasoline engine Engine power: 4.8kW(6.5HP) Weight: 78kg Rotor diameter: 91cm(36") Blade number: four Finish blade:35X15cm(14"x6") Blade included With iron pan

Voltage: 220-240V~60Hz Copper pump Copper wire induction motor Input power: 2000W Max Pressure: 90Bar (1305PSI) Flow rate: 10L/min 500 hours

Size:25mm*19mm*305mm Material:40cr Heat treatment,limpid powder coating NEW style handle Packed by label

2Ton Min. height:140mm Max height:285mm Travel:145mm Weight: 6.2KG Packed by color box

Size: 45 Outsole material: PU/PU Safety toecap: steel Outer material: suede leather and textile Closure: lace-up Heel type: flat Safety

Size:16" Length:400mm Thickness：0.9mm, 7TPI With teeth protector Heat treatment Two-color soft handle Packed by paper card

5 pcs Step drill bit set 1pcs 4-12mm,1mm/step,Shank:1/4" hex shank 1pcs 4-12mm,2mm/step,Shank:1/4" hex shank 1pcs 6-18mm,2mm/step,Shank:1/4" hex shank 1pcs 4-22mm,2mm/step,Shank:1/4"

4X75mm Chrome-Vanadium Steel Sandblasted surface Packed by blister card

45Pcs 1/4" Socket set Include: 1Pcs 1/4" ratchet wrench,45T 13Pcs 1/4"Dr socket:4-4.5-5-5.5-6-7-8-9-10-11-12-13-14mm 1Pcs 1/4" Dr. universal joint 2Pcs 1/4"Dr extension

Capacity:25kgs Barrel diamater: 295mm Height: 440mm Hose length: 1500mm Pressure: 3000psi Material of barrel : Steel Rubber handle With one

Input voltage: 220V Frequency: 50/60Hz Charging voltage: 12/24V Rated current: 7/3.5A LCD display High frequency&fully automatic Protection of short circuit,reverse

Size:7"/180mm Stand high pressure:1000V 100% Tested Black finish and polish Insulated handle Packed by half double blister

Size: 10" Material: carbon steel Hardened steel: HRC40-HRC50 Jaw width: 95mm Throat depth: 50mm Openings range: 0-20mm Heat treatment Nickle

Multiple gases Material:impregnated activated carbon Only suitable for WRJ2502,WRJ1501 Great filtering effect,against most toxic powder or aerosol Packed by color

Size:15mm Material:50BV30 Heat treatment Chromed plated Packed by plastic hanger

20Ton Min. height:220mm Lifting height:140mm Adjustable Height:60mm Weight:8.28KG Packed by color box

Size: 39 Out sole material: PU/PU Toe cap: steel Outer material: suede leather and textile Closure: lace-up Heel type: flat

Diameter:55mm Cutting depth:25mm Cutting with water Packed by plastic box

Unique design two tone soft handle Aviation snip (Straight) Length:250mm（10"） Max.cutting thicness: Carbon steel ≤1.2mm Stainless steel ≤0.7mm Packed by

Iron padlock sleeve Size:38mm,2pcs/set Single lock weight:146g Lock body material: iron Brass lock cylinder With 4pcs iron keys Packed by

Load: 3T Length: 10m Width: 50mm Ribbon material: PES With ratchet and double J hooks Packed by label

8x160mm,SDS plus High quality TCT tip Chrome-Vanadium Steel SDS plus shank Sandblasted surface Packed by plastic hanger with plastic shrink

Size:4mm*18mm*300mm Material:45# carbon steel Heat treatment Packed by label

Diameter of pipe: 6,8,10,12,14,15mm Chrome plated steel backplane Forged steel frame Packed by sliding card

Brushless motor Voltage: 220-240V~50/60Hz Input power: 350W No-load speed: 4000-10000rpm Dia of sanding pad: 150mm Variable speed control Velcrops base