Diameter:25mm Cutting depth:25mm Cutting with water Packed by sliding card

40CR,PH3, Round shank Diameter：8.0mm length：200mm Packed by plastic hanger

Tip type: slotted Tip size: 6.5mm Round shank Diameter: 6.0mm Length: 125mm Material: Cr-V steel Blade finish: black tip Magnetised

Length:550-750mm Material:55# carbon steel Heat treatment blade Telescoping shaft Packed by label

Belt clamp Belt length: 4m Body material: ABS Packed by double blister

40CR,Round shank Slotted:6.5mm Diameter:6.0mm Length:125mm Packed by plastic hanger

180(7"")X22.2mm Blade width:5mm Packed by double blister

Voltage: 220-240V~50/60Hz Carbon brush motor Aluminum wire Input power: 1400W Max pressure: 110Bar (1595PSI) Flow rate: 5.6L/min Auto stop system

Phillips go-through screwdriver Blade material: S2 Tip type: phillips PH3(magnetic) Blade length: 200mm Blade diameter: 8.0mm Shank type: hex Handle

1/2"Dr. deep 6pt. socket Size: 12mm Length: 78mm Material: 50BV30 steel Heat treatment Chromed plated Packed by plastic hanger

Size:11" Carbon steel HRC38°-HRC48° Nickel plated Packed by plastic bag

Capacity：20oz Material：304 Stainless Steel Size：88mmx175mm Weight：300g BPA free With double vacuum insulation to protect the temperature The lid prevents overflow

Weight：4LB Drop-forged hammerhead Heat treatment,45# carbon steel Unique design fiberglass handle Packed by label

Size:230x100mm Carbon steel Packed by label

Voltage:20V With 1pcs lithium-ion cordless drill(WCDP511) With 1pcs lithium-ion impact wrench(WCD1512) lithium-ion impact wrench(WCD1512): Brushless motor Square Drive:1/2" No-load speed:0-1300/0-2300rpm

Size: 9" Clamping diameter: 30-120mm Belt length: 500mm Drop-forged handle Rubber and nylon belts Heat treatment Chrome plated Packed by

Brushless motor Voltage:20V Hex shank:1/4" No-load speed:0-1300/0-2300rpm Impact rate:0-2000/0-3300bpm Max torque:170Nm Integrated LED work light Include: 1 Pcs screwdriver bit

Range:0-150mm Reading:0.02mm With metric Material:Carbon steel Can measure OD, ID, depth and steps Packed by plastic box

Input voltage: 1~220-240V Frequency: 50/60Hz Input capacity: 8.0KVA No load voltage: 1.8V Rated input capacity: 3.1KVA@30% Class of Insulation: H Applied spot welding: 1.5+1.5mm

Range: 50~1000ppm(methane) Detecting gas: combustible gas Response sensitivity:

Voltage: 220-240V~50/60Hz Carbon brush motor Aluminum wire Input power: 1200W Max pressure: 90Bar (1305PSI) Flow rate: 5.0L/min Auto stop system

Voltage:20V crimping range:16-400mm² Crimping force:120KN Crimp cycle:6-18s(depend on the size of cable) Stroke:42mm 2pcs 20V Lithium-Ion 4.0Ah batteries LED usage

2 In 1 screwdriver set Size:PH2+SL6.5 Length:68mm Shank:6.35mm Material:CR-V Hex shank Packed by plastic hanger

All metal shovel Length: 1000mm Shovel weight: 1.4kg Shovel head weight: 0.7kg Blade type: round point With D-shaped handle Shovel

Shattaf sprayer Hand held sprayer head 1 mode Size: 3.5cm*10.5cm Plastic spray gun, bracket Color: White With 1.2m PVC hose

Tile leveler Materials: PP 17mm high Product weight : 5.15g Accurate levelling system for a more precise and faster installation

Size：8-10-12MM Each bar length:135mm Socket Material:CR-V Surface:chrome-plated Packed by Paper card

Aluminum Alloy Max. Clamping: 70mm Jaw Depth: 35mm Packing by Color box

17x280x22mm,flat Suitable for item WDB1D45 UWDB1D45 Packed by plastic tube

Material:Polyester Cap perimeter：58cm

Voltage: 220-240V~50/60Hz Input power:550W Cutting length hedge trimmer: 450mm Double blade dynamic cutting Handle rotatable 180° Packed by color box

Specification: 43*43*43cm Weight: 580g Packed by carton box

Unique design two tone soft handle Aviation snip (Left) Length:250mm（10"） Max.cutting thicness: Carbon steel ≤1.2mm Stainless steel ≤0.7mm Packed by

HSS,diameter:3mm 2pcs/set Packed by blister card

Diameter:115mm Blade width:20mm Arbor:22.22mm Packed by color box

Cutting range：φ4-φ22mm Output： 100KN Stroke: 24mm Length: approx.480mm Weight: 4.20kg Weight of case: approx.1.20Kg packed by BMC