Charging voltage:220-240V 50/60Hz Max. weight : 30kg With 2g graduation Display : LED screen Table size: 329*240mm 10 Seconds enter

Weight: 3kg Length: 900mm Hammer head material: 45# carbon steel Drop-forged hammerhead Unique design fiberglass handle Packed by label

Carbon steel, Round shank Slotted:6.5mm Diameter:6.0mm Length:150mm Packed by plastic hanger

4" rigid caster wheel Load:130kg Wheel Material:PP+PVC Wheel diameter:4" (100mm) Wheel width:1.25"(32mm) Bearing:double ball bearing Frame material:Cold-Rolled plate Frame thickness:2.5mm

Size: 9mm Length: 130mm Material: Cr-V steel Fine polished Chrome plated, matt finish Packed by paper card

Voltage: 20V No-load speed: 15000rpm Average air volume: 8.5m3/min Max. air speed: 115km/h Include: 1 Pcs 2.0Ah 20V battery pack(WLBP520)

Reflective rain coat Material:PVC+polyester 100% New PVC Length:120cm Thickness:0.35mm Size:XXL Reflective logo on chest Cuff with two circles of reflective

12 Pcs Cold chisel and punch set Material: 40Cr steel Include: 2 Pcs center punch: 6x102mm(1/14"x4"); 8x115mm(5/16"x4-1/2") 1 Pcs taper

6 Pcs screwdriver set Material:45# Carbon steel Round shank SL3*75 SL5.5*100 SL6.5*100 PH0*75 PH1*100 PH2*100 Packed by plastic hanger

Voltage:220-240V~50/60Hz Input power:800W No-load speed:0-1100rpm Impact rate:0-4000bpm Impact energy:2.5J Max.drilling capacity: Concrete:26mm Steel:13mm Wood:30mm SDS plus chuck system With 3

Rated voltage:220-240V Frequency:50/60Hz Staring pressure:1.5bar Maximum power allowed: 1100W Max.current:10A Max.pressure:10bar Pipe diameter:1"x1" Protection degree:IP65 Packed by color box

Size:140mm Carbon steel blade Thickness of blade：0.5mm Packed by label

Material: steel(SPCC) Size: 220cm*43cm*3cm Thickness: 1.2mm square tube: 3cm*6cm WPJ2A01:WPJ2A02:WPJ2A03:WPJ2F04=1:7:1:1.5

Inverter ACDC TIG/MMA Welding machine Input voltage(V):1~220-240V (BS PLUG) Frequency(Hz):50/60 Output current(A):220:TIG:5-200 MMA:20-180 Down slop time(S):0-25 Duty cycle(%):30%@40℃ LED display

Length:250mm(10") Adjustable clamp size:0-30mm Packed by paper card

6 Pcs Insulated screwdriver set Include screwdrivers: SL3*75 SL4*100 SL5.5×125 PH1×80 PH2×100 1 Pcs 140mm test pencil New design handle

Screwdriver type: insulated 1000V Tip type: phillips Tip size: PH3 Round shank Length: 150mm Material: Cr-V steel Blade finish: black

All metal hole shovel Length: 1000mm Shovel weight: 1.6kg Shovel head weight: 0.9kg Blade type: round point With D-shaped handle

Voltage: 20V Bar length: 5"(13cm) Chain speed: 5m/s Include: 1 Pcs 5" saw chain 1 Pcs 5" chain saw bar

3pcs/set 1/4", 3/8", 1/2" Shank:1/4" Hex Material:50BV30 Length I:65mm(1/4", 3/8") Length II:73mm(1/2") Packed by slide card

Length: 27"/690mm Max cutting diameter: 18mm Material: 55# carbon steel Heat treatment blade Blade painted teflon Packed by label

Drive size: 1/2" Length: 430mm Torque range: 40-220N.m Tolerance of torque: ±4% Quick release Material: Cr-V+Cr-Mo steel Heat treatment Chromed

Size:4"/100mm Body cast iron T-shaped thread Packed by paper card

Voltage: 220-240V~50/60Hz Input power: 500W No-load speed: 28000rpm Collet size: 6mm and 1/4" Include: 2Pcs wrenches 1Pcs template guide 1Pcs

6" Clamp size:35x150mm Hard plastic body Black finished bar Soft non-marking pads Packed by label

Iron padlock sleeve Size:38mm,4pcs/set Single lock weight:146g Lock body material: iron Brass lock cylinder With 4pcs iron keys Packed by

3" Straight Jaw hand seamer Length:210mm Head size:80(3")*35mm Material:CRV+Q235 Comfortable soft handle Pack by sliding card

Size: 17x21mm Cr-V socket with 12 points Drop forged steel body Black finished Heat treatment Packed by paper card

Size:8",2Jaws Drop forged Heat treated Surface treatment:Zinc plated Packed by carton box

Size:12" Max clamping diameter:40mm Mobile jaw drop-forged with high quality carbon steel Surface spray treatment Packed by paper card

Jig saw blades set 101D*2 100*8*1.45*6T HCS 244D*2 100*8*1.2*6T HCS 111C*2 100*8*1.2*8T HCS 101AO*1 83*8*1.3*18T HCS 118A*1 76*8*0.92*21T HSS 127D*1

Size:50x25mm Grit grade: P100 6mm diameter shank Material: nylon fiber and alumina Suitable for metal and wood Packed by color

Size:8"/200mm Polish and anti-rust oil Carbon steel Packed by plastic bag

Display :6000 counts LCD with backlight AC Current: 60A/600A/1000A AC Voltage:600mV/6V/60V/600V/750V DC Voltage:600mV/6V/60V/600V/1000V Resistance: 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ Capacitance:10nf/100nf/1000nf/10μF/100μF/1000μF/10mf/100mf Frequency:10Hz/100Hz/1000Hz/10KHz/100KHz/1000KHz/10MHz Duty cycle: 1%~99%

15 Pcs router bits set Shank diameter:8mm 4pcs Straight bit 3mm,6mm,12mm,16mm 1pcs Flush trim bit 12mm 1pcs Dovetall bit 12mm

Length:183mm Thickness of blade :0.5mm Plastic handle Packed by label