Shattaf sprayer Hand held sprayer head 1 mode Size: 2.5cm*12.5cm Color: chrome Plastic spray gun, bracket With 1.2m stainless steel

8 Pcs torx key set Size:T9,T10,T15,T20,T25,T27,T30,T40 Material:Cr-V Heat treatment and chrome plate Packed by PP hanger

Size: 17mm Length: 210mm Material: Cr-V steel Fine polished Chrome plated, matt finish Packed by paper card

Diameter: 230mm(9") Arbor: 22.2mm(7/8") YG6 tungsten steel carbide With 1 pcs 20mm reduction ring Suitable for cutting wood with nailed

Without quick plug Load capacity: 100pcs Brad size: 10-30mm Ga18,1.25x1.00mm With safety trigger Operation pressure: 0.4-0.7Mpa(60-100Psi) Packed by color box

1/2"Dr. deep 6pt. socket Size: 30mm Length: 78mm Material: 50BV30 steel Heat treatment Chromed plated Packed by plastic hanger

Size:600mm Magentic power：4LBS Flexible shaft Plastic handle Packed by paper hanger

Square drive:25mm(1") No-load speed:4600 rpm Max.torque:2200Nm(1622ft) Twin hammer mechanism With universal connector. Air Pressure:6.3bar(90psi) length:253mm(9.96) Weight:7kgs(15.5lbs) Avg.air consumption:583L/min Air Inlet:3/8"

Size: 1/2"(F)x3/4"(M) Material: 50BV30 steel Heat treatment Chrome plated Packed by plastic hanger

Voltage:220-240V~50/60Hz Input power:710W No-load speed:12000rpm Disc diameter:115mm Spindle thread:M14 With 1pcs auxiliary handle Disc not included Packed by color box

HSS Rotary cutter Material: tungsten carbide Single cut Shank: 6mm Head size: 8mm Carbide Burs are used for shaping, grinding

6-in-1 Multi-function long nose pliers Size: 8"/200mm Energy saving 30% than normal pliers Material: Cr-V Surface treatment: black finish and

IGBT inverter technology Input voltage(V):380-400 Phase:Three Frequency: 50/60Hz Output current: 20-400A Duty cycle: 400A@55% LED display Insulation class:F Protection class:IP21S

Earth ground resistance: 0Ω~29.99Ω, accurcy:±(2%+6dgt) 30Ω~4.00KΩ, accurcy:±(3%+3dgt) Digital display&analog bars display 2Pole and 3Pole mode With 6pcs LR14 batteries MAX/MIN/AVG/REL

Aluminum Handle Light weight Size:36" (900mm) Max clamping diameter:85mm Mobile jaw drop-forged with high quality carbon steel Solid rivet Packed

Length & width:20mx12.5mm With metric and inch Pure material retracting gear Integrated handle good for using and convenient storing Packed

Size: 12"/300mm Max.cutting thicness: Carbon steel ≤0.8mm Stainless steel ≤0.6mm With plastic handle Packed by half double blister

Length:250mm Ancho:63mm Blade with powder coating PP handle Packed by paper card

25Pcs 1/2" Socket set Include： 1Pcs 1/2"Dr ratchet wrench,45T 18Pcs 1/2"Dr socket：10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-27-30-32mm 1Pcs 1/2"Dr universal Joint 2Pcs 1/2"Dr extension bar：125mm

Voltage: 20V With 2pcs lithium-ion battery pack(WLBP520) Lithium-ion battery pack(WLBP520): Lithium-ion 2.0Ah battery LED battery power indicator One battery fits

Measuring Range:0.05-40m Measuring Accuracy:±2.0mm Laser Type:635nm,

16L Battery Sprayer Voltage:20V Pressure: 5BAR Two-speed control Include: 1 Pcs 2.0Ah battery pack(WLBP520) 1 Pcs fast charger(WFCP518) Material: PE

Width:16mm（5/8''） Length：140mm Packed by sliding card

Voltage: 220-240V~50/60Hz Input power: 1050W No-load speed: 0-2800rpm Max.drilling capacity: 13mm Variable speed control Forward/Reverse switch Hammer function Aluminum gear

Without quick plug Square drive: 12.7mm(1/2") No-load speed: 150rpm Max.torque: 61N.m(45Ft-Lb) Front exhaust Capacity bolt size: 1/2"(13mm) Air Inlet: 1/4"

Length：120cm Aluminum thickness:1mm Packed by color sleeve

Voltage: 220-240V~60Hz Copper pump Copper wire induction motor Input power: 2000W Max Pressure: 90Bar (1305PSI) Flow rate: 10L/min 500 hours

Rated current:500 A Copper jaws and chromed steel handle Maximum jaw opening: 75 mm Length:205 mm Weigh:250 g Packed by

Size: 165mm(6-1/2") Teeth quantity: 24T Arbor: 20mm Reduction ring: 16mm Matrix thickness: 1.0mm Wood cutting Packed by double blister

25mmx25x6mm Grit grade: 40# 6mm diameter shank Suitable for metal and wood Packed by color box

Size：12MM Socket Material:CR-V Length：185*300mm Surface:chrome-plated Packed by Paper card

Shank specification :6mm Tool head specification 13mm Material: GCr15 Burs are used on wood, rubber,aluminum(deburring) Used with pneumatic or electric

13mm,3pcs/set Shank:1/4" Hex Length:65mm Material：50BV30 With strong magnet Packed by sliding card

Screwdriver type: insulated 1000V Tip type: slotted Tip size: SL4.0 Round shank Length: 100mm Material: Cr-V steel Blade finish: black

"6 Pcs router bits set Shank:8mm 1pcs R-6.3mm Core bit 1pcs 6mm straight bit 1pcs R-6.3mm corner round 1pcs 12.7mm

Size：300mm（12”） Number of teeth：24T 6pcs/set Material：65Mn Packed by paper card