Pump type: 3WZ-3600B Max output: 9.0HP Max. pressure: 250Bar (3600psi) Flow rate: 4.0GPM Displacement :418cc Starting system: recoil Engine speed:

Without quick plug Nozzle size:185mm Washing capacity:0.75L Operation pressure:4bar Packed by color box

Size: 44 Outsole material: PU/PU Safety toecap: steel Outer material: suede leather and textile Closure: lace-up Heel type: flat Safety

Voltage: 220-240V~50/60Hz(BS Plug) Input power: 100W Preheat time: 3~5min Straight, tip head With a piece of support Long life replaceable

30 Pcs screwdriver set Material:CR-V With 1 pcs 1/4"*100mm screwdriver magnetic shank With 20 pcs c-rv 4*25mm screwdriver bit:SL3 SL4

Diameter:65mm Cutting depth:25mm Cutting with water Packed by plastic box

25mmx25x6mm Grit grade: 60# 6mm diameter shank Suitable for metal and wood Packed by color box

IGBT inverter technology Input voltage(V):380-400 Phase:Three Frequency: 50/60Hz Output current: 20-400A Duty cycle: 400A@55% LED display Insulation class:F Protection class:IP21S

Size: 24" Length: 600mm Thickness:0.9mm Teeth size: 7TPI With teeth protector Heat treatment Two-color soft handle Packed by paper card

Size:7" Openings range: 0-33mm Carbon steel HRC38°-HRC48° Nickel plated Packed by pp hanger

Suction&Discharge port diameter:80mm,3" Max.flow:1000L/min Max.head lift:27m Max.suction head:8m 7.0HP gasoline engine Displacement:208cc Fuel tank:3.6L Starting system:Recoil Packed by carton box

Without quick plug Standard nozzle:1.5mm Pattern width:180-250mm Paint capacity:1000cc Suitable for base coat Optional nozzle:1.2-1.8mm Operating pressure:3-4bar Air cons:4.2-7.1cfm(119-200l/min) Packed

Socket size:19mm Total length:300mm Material:CR-V Heat treatment Forged socket wrench With screw driver crowbar Chrome plated Packed by label

Size:230x280mm 50Pcs/set Grit:P240 Match with most of the hand sanders Suitable for sanding wood Packed by color box

Aluminium Hand oil pump Pump rate 25L/min Length: 127cm Pumps diameter: 125mm Material: Aluminium Zinc plating Packed by colour box

Size:6" Length:150mm Material:65Mn Teeth size: 7TPI Precision ground teeth 2 edges Double edge design with a sharpened tip Hardened carbon

Brass padlock set sleeve Size:40mm,4pcs/set Single lock weight:108g Lock body material: brass Solid brass cylinder with pins With 3 pcs

Size:6" Carbon steel HRC38°-HRC48° Nickel plated Packed by plastic bag

7 Pcs Insulated screwdriver set Include screwdrivers: SL3.0×75 SL4.0×100 SL5.5×125 SL6.5×150 PH0×75 PH1×80 PH2×100 New design handle Round shank, 1000V

Length:1000mm,40" Width:32mm Material:steel With metric and inch Packed by paper card

Side spring clip clamp Size:4" Material of body:PA6+GF30 Material of jaw:ABS Material of tape:silica gel Packed by label

Size: 10"/250mm Max.cutting thicness: Carbon steel ≤0.8mm Stainless steel ≤0.6mm With plastic handle Packed by half double blister

10 Pcs 1/2"DR. deep impact socket set Size:10.12.13.14.15.17.19.21.22.24mm length:78mm Material:Cr-V Heat treatment Packed by BMC

Size：300mm（12”） Number of teeth：18T Material：65Mn Packed by plastic box

Dia: 75mm, 3" Shank dia: 1/4" Wire dia: 1.2mm Wire length: 10mm RPM: 4500r/min Apply on: roughening, structuring, descaling/paint stripping

Length:11" Material：Zinc-aluminum+Q235+GCr15 Throat depth: > 33mm Penetrable steel plate thickness：0.5mm-0.8mm Comfortable soft handle Pack by sliding card

Weight:8oz Hammerhead same like 8oz claw hammer Drop-forged hammerhead Heat treatment,45# carbon steel Unique design fiberglass handle Packed by paper

Voltage: 220-240V~50/60Hz Input power: 1600W No-load speed: 630rpm Impact rate: 3850bpm Impact energy: 10J Max.drilling capacity: Concrete: 40mm Core bit:

6 Pcs Pin punch set Round head Punch type: pin Material: 40Cr steel Length: 152mm(6") Head diameter: 1.5mm (1/16");3mm (1/8");4mm

Extenal dimensions(H*W*D):8"*17*14"(20*43*35cm) Volime:27L Thickness(door panel/box body):3/1.5mm Can be registered 3 to 8 digit code freely Net Weight:9kg Mounting:can be fixed

Size: 17mm Length: 210mm Material: Cr-V steel Fine polished Chrome plated, matt finish Packed by paper card

Size: 19" Material: 600D polyester Max load: 20kg With Wheeled Telescopic pull handle Size(L*W*H):48*28*36cm With 7 Pcs external pockets and

Material: Cr-V Size: 3~6,6~8,8~11,11~14,14~18mm Hardness: 48~52HRC Coarse thread Packed by plastic box

40CR,Round shank Slotted:6.5mm Diameter:6.0mm Length:150mm Packed by plastic hanger

Size: 10" Material: carbon steel Openings range: 0-41mm Nickel plated Weight: 592g Packed by plastic hanger

Drill diameter:18mm Shank 1/4" hex shank Material 65#carbon steel Total length:152mm Packed by Blister card